|
Heavy Duty 6” X 2”
Standard Rubber
Dumpster Wheel
APPLICATIONS:
Industry Standard Dumpster Wheel, cushioned rubber tread vulcanized to strong cast iron hub with zerk lubrication, excellent floor and load protection, easy rolling, and shock absorbing quiet operation. This is a direct replacement of the wheel that came on your dumpster. |
| SPECIFICATIONS: |
SWIVEL: |
Two rows of ball bearings
in hardened raceways. |
FORK: |
1/4" formed steel plate,
double welded. |
KING PIN: |
3/4" heat treated
bolt and nut. |
LUBRICATION: |
Zerk in swivel raceway,
wheel hub or lube axle. |
AXLE: |
l/2" Diameter bolt and nut. |
FINISH: |
Zinc Plated. |
|
 |
J&T Dumpster Approved
Standard Dumpster Wheel, quiet operation, direct replacement."
#480 lb capacity |
 |
| |
Extra Heavy Duty 6” X 2”
PHENOLIC
Dumpster Wheel
APPLICATIONS:
Phenolic Wheel……. Heavy Duty capacity Dumpster Wheels made from Phenolic resin is a solid wheel that can really take a beating and is long lasting. Its non-marking floor protection and it’s resistance to oil, grease, water and most solvents makes this the Cadillac of dumpster wheels. Its super quiet and super smooth ride makes moving your dumpster a pleasure.
|
| SPECIFICATIONS: |
SWIVEL: |
Two rows of ball bearings
in hardened raceways. |
FORK: |
1/4" formed steel plate,
double welded. |
KING PIN: |
3/4" heat treated
bolt and nut. |
LUBRICATION: |
Zerk in swivel raceway,
wheel hub or lube axle. |
FINISH: |
l/2" Diameter bolt and nut.
Zinc Plated. |
|
 |
J&T Dumpster Approved
Super Quiet, very smooth and non marking
#1200 Lb Capacity |
|
| |
Super Heavy Duty 6” X 2”
Steel
Dumpster Wheel
APPLICATIONS:
Extreme service Dumpster Wheel, Noisy, Rough and Tough will tolerate the unnecessary abuse of most garbage collectors. Does not roll well on rough surfaces, excellent for high capacity, sustains sharp impacts while under full load, long wearing. Recommended for smooth concrete or Pavement areas only, Do Not use on any indoor flooring, damage can occur.
|
| SPECIFICATIONS: |
SWIVEL: |
Two rows of ball bearings
in hardened raceways. |
FORK: |
1/4" formed steel plate,
double welded. |
KING PIN: |
3/4" heat treated
bolt and nut. |
LUBRICATION: |
Zerk in swivel raceway,
wheel hub or lube axle. |
FINISH: |
l/2" Diameter bolt and nut.
Zinc Plated. |
|
 |
J&T Dumpster Approved
Extreme service wheel, Noisy, Rough and Tough
#1200 Lb Capacity
|
|
| |
 |
Caster Pad
Heavy Duty Steel quick change caster pads must be welded on your dumpster. Any of our J&T approved dumpster wheels will be a perfect fit. They come with the required nut and bolt to secure wheel. If the corner of the dumpster is rotted where the pad goes, check out our dumpster bottom repair kits. |
|
|
